In order for us to recommend the suitable barcode scanner for you, please fill up the form with relevant information. Please refer to the guide below if you are not sure how to fill up the form.
Once you have filled up the form with the relevant information, click “Send”. We will review your requirement and we will get back to you as soon as possible.
If you are not sure about your requirement, please do schedule a consultation with us and we will arrange for a discussion. Click HERE to schedule your free consultation.
Please fill up the required information below.
Please refer to explanation guide when filling up the form.
1. TYPE OF BARCODE TO SCAN
1D Barcodes2D Barcodes1D and 2D BarcodesNot Sure
There are 2 types of barcode: 1D barcodes and 2D barcodes.
2. BARCODE SCANNER USAGE
Is it used for General Usage or Rugged Environment / Industrial?
What is the Barcode Scanner Interface? USB, RS232 or Ethernet RJ45?
4. SIZE OF SMALLEST BARCODE AND BIGGEST BARCODE (IF ANY)
We need the Dimension of barcode and the Number of Characters.
If it is a 2D barcode, we will need Number of Dots on X-Axis and Y-Axis and Dimension of the barcode.
In this example, there are 18 dots by 18 dots (count the number of black and white dots on one side).
X-Axis : 10mm, Y-Axis : 10mm
Please send us an image with a ruler beside the code.
4.1. SIZE OF SMALLEST BARCODE
Dimension of Barcode:
Number of Characters:
4.2. SIZE OF BIGGEST BARCODE
Dimension of Barcode:
If it is a 2D Barcode; number of dots on X-Axis and Y-Axis:
5. SCANNING DISTANCE
Distance of Barcode to Barcode Reader (in mm):
Distance of Barcode to Barcode Reader in millimetres.
Is it going to be Dynamic or Static?
Example of Dynamic Application
Example of Static (Stop and Scan) Application
For Dynamic Application, we will need:
- The number of parts per minute
- Distance of part to part in millimetres (see illustration below)
- Size of Part
- Speed of Conveyor in mm/seconds.
For Dynamic Application
Parts per minute:
Distance of part to part (in mm):
Size of Part:
Speed of Conveyor:
7. MARKING METHOD
ThermalLaserInk JetDot Peen
4 type of Marking Method: Thermal, Laser, Ink Jet and Dot Peen
8. MECHANICAL CONSTRAINT
Mechanical constraint for example, things blocking on top, scanner have to mount at the side, etc. Please list out the mechanical constraint on the line.
9. UPLOAD YOUR IMAGE (in jpg, jpeg, pdf or word doc with max file size: 5mb)
- Please provide the image of barcode with a ruler on the barcode to illustrate the dimension.
- Please provide us with image of the Line Setup (Position where the scanner is to be mounted)
Your Name (required)
Your Email (required)
Your Contact (required)